Product Description

The DDS02.1-W150-DS56-00-FW is one of the latest and most sophisticated productions of the reputable Rexroth Indramat; this device is a unique industrial drive controller designed to facilitate industrial production by accurately controlling the operation of synchronous and induction motors used in the industrial servo system. This controller is designed to meet international quality standards; it features a durable housing unit that offers protection according to the IP20 protection class and is also specially structured to allow for the direct integration of the controller into the industrial servo system. The DDS02.1-W150-DS56-00-FW industrial controller is often supplied as a fully configured unit made of special configuration cards such as the command communication card, special plug-in module, and the auxiliary plug-in module. However, the controller is not supplied with a firmware module; this should be specially ordered as a separate unit by the industrial operator.

The DDS02.1-W150-DS56-00-FW industrial controller keeps its internal temperature within a permissible range via forced ventilation; its housing is also designed with special silts through which the hot air generated by the controller can easily leave the housing of the device. The continuous input current used by this industrial controller is about 65 amperes; the controller can operate with an input voltage as high as 150-degree celsius. The power circuit of this controller also generates a leakage current of about 3.5 milliamperes. Operators should ensure the controller is securely grounded before it is switched on for operation to prevent electrical accidents.

The DDS02.1-W150-DS56-00-FW industrial drive controller contains special light-emitting diodes that the operator can use to monitor the operation of the controller in real-time. The maximum permissible ambient temperature for the operation of this controller is about 50 degrees celsius.