Product Description

The DDS02.1-W100-RL04-01-FW is a unique industrial drive controller produced by highly trained engineers of Rexroth Indramat to control the operation of induction and synchronous motors used in the industrial servo system. This drive controller is a cost-effective device that can operate at a top level for more than five years without requiring any major repair operation. This drive controller is manufactured by highly trained engineers; it combines past drive control experiences with new technological designs, which makes it a representation of contemporary motor control advancement. Under normal operating conditions, the DDS02.1-W100-RL04-01-FW is perfectly safe for industrial operate as it is free of dangerous chemicals and perfectly responsive to configurational commands; however, the operation of this controller with the wrong accessories, wiring or configuration parameters can cause it to initiate the dangerous movement of the servo motors.

The DDS02.1-W100-RL04-01-FW industrial drive controller regulates its internal temperature via forced ventilation; it features an air inlet and air outlet through which its internal air blower conducts cool air over an internal heat sink. To facilitate this controller's temperature regulation process and prevent the rapid build-up of heat in the servo system, operators should ensure the controller is installed with a minimum clearance of about 80 millimeters. This industrial controller is particularly compatible with industrial motors that feature resolver feedbacks which provide it with digital signals it requires to carry out its control operation.

The DDS02.1-W100-RL04-01-FW industrial controller operates with a DC bus voltage of 300 volts; under ideal operating conditions, it generates a leakage current of about 3.5 milliamperes, which makes it necessary for industrial operators to ensure the controller is securely connected to a grounding system before operation.