Product Description

The DDS02.1-W100-DL02-00 is a highly sophisticated industrial control device designed by Rexroth Indramat to control the speed, acceleration, and general operation of induction and synchronous motors. This drive controller is a cost-effective device that can maintain operational efficiency of about 95 percent for more than five years under normal operating conditions. It also requires a connection to the Indramat power supply unit with a regulated DC 24-volt voltage for optimum operation. The DDS02.1-W100-DL02-00 industrial controller is modular in design; this module design makes it possible for industrial operators to configure the drive controller by the installation of various modules into the housing of the device. The housing of this controller is designed with high metal content; it offers protection that meets the IP20 protection class and is specially structured to allow for peer-to-peer coupling of this device with other drives.

The DDS02.1-W100-DL02-00 industrial drive controller contains electrical components that can generate a leakage current as high as 3.5 milliamperes during operation. This industrial drive controller can operate with a maximum input current of about 100 amperes and a DC bus voltage of about 300 volts. For optimum operation, this industrial controller should not be operated at a relative air humidity level that exceeds 95 percent and an absolute air humidity level higher than 25 percent.

The maximum ambient temperature at which this industrial drive controller can be operated is 55 degrees Celsius; operating the controller above this temperature can significantly reduce the efficiency of the controller. This industrial drive controller is repeatedly tested and certified to operate according to the technical data stated in its documentation before it is packaged for delivery; it is also delivered with a type label that the user can use to easily identify the device.