Product Description

Compact in design, the DDS02.1-W100-DC01-01-FW is manufactured by Bosch Rexroth and can serve various purposes. In order to make it more flexible, plugins can be used. All necessary hardware is pre-installed, making it ready to use right out of the box. In most cases, a DDS02.1-W100-DC01-01-FW unit that has been configured includes the drive controller itself, as well as plugin adapters and software modules. It has five module slots, three of which are reserved for supplementary plugins. Also, the two additional slots are intended to house the command communication and firmware modules.

The DDS02.1-W100-DC01-01-FW is a 100-A drive controller. It uses heat technology to cool and disperses heat internally. This cooling method may necessitate a large control chamber and air conditioning. It is also the easiest to install and mount. This model uses an INTERBUS-S interface command communication module. Additionally, it features digital servo feedback motor feedback. As per EN 60529, it has a protection rating of IP 20. Also, this DDS drive controller has a 300 V DC bus voltage. The DDS02.1-W100-DC01-01-FW can only be started if its associated equipment, parts, and peripherals comply with EC directives.

Furthermore, only authorized spare parts may be used with this unit, and all safety protocols must be rigorously observed. Without reducing the nominal data, this device's allowed average temp range is 0 to 45 degrees Celsius. The peak installation height with rated data is 1000 meters. If this unit's data is derated, the maximum admissible environmental temperature is 55 degrees Celsius. The DDS02.1-W100-DC01-01-FW has a maximum acceptable absolute air humidity rating of 25 g/m³ and a maximum permissible relative air humidity of 95%.