Product Description

The DDS02.1-W050-RS03-03-FW drive controller features a high discharge current.  The cooling of the device during operation takes place through heat technology or the flow of air inside the control cabinet. The product must be de-energized by using a master switch and prevented from being turned on during cleaning, repair and maintenance work. The hardware configuration plate is located at the bottom of the unit while the firmware configuration plate is at the top. The slots of the basic unit are empty by default. The power section of the controller has a bus voltage of 300 +/-15% VDC. The device has a maximum continuous current rating of 40A and a maximum peak current rating of 50A. The drive controller comes with a one-year warranty.

The controller must be stored and transported between a temperature range of -30°C and 85°C. The storage of this product should be done in a dry environment which is free of shock and dust. The plugin modules have to be kept in special packaging during storage and transport. The device features a fault reset key and a status display that highlights the warning and error messages. The unit makes use of an RS-232 interface for connection to a PC or a terminal. It has two analog diagnostic outputs with an output voltage rating of 10VDC and a current load capacity of 4mA.

The starting lockout of the drive controller can be activated by applying a voltage between 20VDC and 30VDC to the AS+ and AS- input terminals. The controller is widely used in robotics, printing, textile, packaging and handling machinery and machine tools. The device uses a SERCOS interface as the communications module. This plugin module helps in operating the product with compatible controls through a fiber optic cable. The DDS02.1-W050-RS03-03-FW unit can be delivered safely to your preferred address and is backed by a one-year Wake Industrial warranty.