Product Description

The Bosch DDS02.1-W050-DS27-01 is a digital drive controller. The hardware and firmware for the device are modular. The firmware developed by Bosch come with support for different feature sets that are optimized for different applications. For this reason, the drive firmware has to be ordered separately. A completely configured DDS02.1-W050-DS27-01 drive controller hardware is comprised of a basic unit, a software module, a command communication module and optional plug-in modules. The DDS02.1-W050-DS27-01 features a SERCOS command communication module. The output of the DDS02.1-W050-DS27-01 is 50 Amps. Integrated digital servo feedback is supported by the drive. The DDS02.1-W050-DS27-01 cools via natural convection of air from inside the cabinet. For this reason large cabinets are required for drive mounting. Air conditioning may be required in certain cases for maintenance of ambient temperature.

The optimal ambient temperature for an operating DDS02.1-W050-DS27-01 is 0 to 45 degrees Celsius. The maximum permitted ambient temperature with output derating is 55 degrees Celsius. The optimal range of elevations for an operating DDS02.1-W050-DS27-01 is 0 to 1000 meters. The maximum permitted elevation with output derating is 5000 meters. If both the altitude and temperature are outside recommended limits at the same time, then the respective load factors have to be multiplied leading to a greater reduction in the drive output. The DC bus on the drive controller carries a nominal voltage of 300 Volts DC with maximum ±15% tolerance. The controller is fitted with a configuration rating plate that helps with equipment identification. This rating plate lists the type designations for the drive controller, the basic unit, the software module and the plug-in modules. The weight of the DDS02.1-W050-DS27-01 is approximately 7.5 kilograms.