Product Description

The DDS02.1-W050-DS24-04-FW is a DDS series drive controller. It is developed by Bosch Rexroth for motor control in industrial applications. The basic unit of the device is modular and contains slots for designated and optional modules. The designated modules are a software module and a command communication module. The command module installed on the DDS02.1-W050-DS24-04-FW is SERCOS which uses a fiber-optic network for drive-to-drive and drive-to-motor communication. The software module for DDS drives contains the drive firmware and programmed operating parameters. The firmware for the DDS02.1-W050-DS24-04-FW has to be ordered separately from the hardware. The software module can be copied to other software modules. If required, the software module can also be removed and shifted to a replacement drive. Function ID of the DDS02.1-W050-DS24-04-FW drive is 24. The function ID version is 04.

The DDS02.1-W050-DS24-04-FW has a rated current output of 50 Amps. This current is available if the motor is operated under specified ambient conditions that are 0 to 45 degrees Celsius ambient temperature and 0 to 1000 meters altitude. The relative humidity during drive operation should not go above 95%. Unused DDS drives should be stored in an area which is free of dust and corrosive elements and where the ambient temperature is between -30 and 85 degrees Celsius. The protection category of the drive is IP20. As the drive housing does not provide any protection from liquids, the drive has to be mounted inside a suitable control cabinet. The DDS02.1-W050-DS24-04-FW supports digital servo feedback and cools via convection cooling with air from inside the cabinet. Dimensions of the DDS02.1-W050-DS24-04-FW controller are 355 x 60 x 325 millimeters and the drive controller weighs 7.5 kilograms.