Product Description

Bosch is leading the market through its top-notch automation products. The company is mainly concerned about Customer satisfaction and product quality.

The DDS02.1-W050-DS09-00 model comes with a SERCOS interface for developing efficient communication with the attached modules and the motor. An RS232 serial interface is provided in this model for attaching external devices such as VT terminals and PCs. The DDS02.1 drive controller is designed to make an electrical connection through a 24 VDC supply. The controller must be operated inconjunction with the modules and motors specified for the digital intelligent drive system. The controller comes with 5 plug-in slots that can be customized by installing several modules and interfaces. You should order the required firmware module according to the drive configuration. A lithium-ion battery is placed in this model to store data and the drive parameters during the de-energized state. The DDS02.1 drive controller develops a rapid-response drive system when operated together with the modules specified in the user manual. The controller must be used under recommended climatic conditions such as 0 to +45 degree Celsius operating temperature range, 95% relative humidity, 1000 MSL highest installation altitude, and +55 degree Celsius maximum bearable temperature. With the further increase in these parameters, the efficiency of the controller will decrease.

The model DDS02.1-W050-DS09-00 consumes 50 A of rated current to control the internal circuit of the controller. The controller uses DSF to monitor the indirect position of the motor output shaft. A temperature monitoring sensor is also installed in this controller and the module uses air from outside the control cabinet to maintain its housing temperature. The drive operating at 24 VDC voltages consumes the rated power of 500 mA. This drive controller (DDS02.1-W050-DS09-00) can be delivered to you by Wake Industrial.