Product Description

The DDS02.1-W050-DL22-00 is an industrial drive controller manufactured by Rexroth Indramat to control the general operation of synchronous and induction motors used in the industrial servo system. This controller is a new-generation device; it features a housing unit that meets the IP20 protection class and aids the direct installation of the motor into the industrial servo system. The operation of this industrial controller is very straightforward, and the controller contains a user-friendly user panel that is made up of a four-line display unit and special pressure-sensitive keys. The housing of this controller is inscribed with special signs and symbols; operators should pay close attention to these warning symbols as they provide information about specific parts of the controller that are capable of causing industrial accidents if they are mishandled.

The DDS02.1-W050-DL22-00 industrial drive controller is supplied to the industrial operator as a fully configured device containing the command communication module, auxiliary plug-in modules, and the software module, integrated into special slots numbered from U1 to U5 on the housing of the controller. The control device also contains a modular design; this design allows industrial operators to replace any part of the controller without having to reconfigure the whole servo system; the modular design of this controller also aids the temperature regulation process of the controller as it allows for the smooth movement of cool air in and out of the device.

The communication between the DDS02.1-W050-DL22-00 industrial controller and all other parts of the industrial servo system is done through two major cables; the power cable and the motor feedback cable; the power cable conducts electrical energy between the controller and the motor while the motor feedback cable aids the exchange of digital information between these two devices.