Product Description

The Rexroth DDS02.1-W025-DL22-01-FW is a drive controller. Drive controllers are electronic devices used to modify the input power to motors by adjusting the current or alternating current source to a pulsed, current output of varying pulse frequency. Typical applications of drive controllers are motor control applications in manufacturing and construction environments, micro-positioning, robotics, etc. The drive controller is commonly integrated with the drive circuits and supplies the necessary control signals to the drive. The required safety instructions and regulations should be followed in installing and operating machines with drive controllers. It is essential to disconnect the equipment from the mains or voltage source before commencing work on electrical parts with voltages above 50 volts to prevent bodily injuries.

The average DC bus voltage for the DDS02.1-W025-DL22-01-FW is 300 Volts with an acceptable range of +/- 15% of the average. The current consumption for the drive controller in DC of +24V is 500mA. The power dissipation for the drive controller is 260W, and the continuous current at a standstill is between 40 and 50 Amperes. In transporting the drive controller, store it in a dry, dust, and shock-free environment within a permissible temperature range of -30 to +85 degrees Celsius. Shock-damping supports could be used during transportation if necessary. The approximate weight of the DDS02.1-W025-DL22-01-FW is 7.5 kilograms. The digital servo feedback and single-axis position control are determined and documented by the manufacturers. The drive controller model has firmware which is ordered as a separate subitem. The maximum permissible absolute air humidity during operation is 25 g/m³.