Product Description

The DDS02.1-W025-DA02-01-FW drive controller is likely to have high electrical voltage because of incorrect connections. The Bosch Rexroth product tends to have dangerous movements at any point of time during operation because of several reasons like an incorrect command or faulty wiring or cable. The e-stop switch of the device must be installed in an easily accessible position. The unit is not intended to be operated near remote control, high-frequency and radio equipment. It should be handled carefully taking care to avoid crushing and pinching during installation. The firmware of the controller must be bought as a separate sub item.

This drive controller supports four plug-in modules that determine its functions. The fifth slot in the basic unit of this product is dedicated to the software module. The device utilizes an analog interface that triggers the actual position values meeting the SSI standards. This interface features 30mA current consumption at +/-15V. The unit is meant to be installed at a maximum elevation of 1,000m with rated data. It weighs approximately 7.5kg. The controller has to be installed in a large control cabinet because of the heat technology type cooling mode. Its firmware keeps getting updated to perform the functions correctly without a change to the functions.

The configuration rating plate of the product features details that can help to obtain the replacement parts efficiently and quickly when there is a breakdown. The device comes with 25A maximum continuous current. The unit encompasses protection against penetration of solid objects with diameters of more than 50mm. It is mounted on the back wall of the control cabinet with the help of a mounting panel. The product has to be transported using shock damping supports if needed. The device must neither be tipped nor dropped during transit. This DDS02.1-W025-DA02-01-FW controller is available with a warranty for one year and is shipped in custom military-grade packaging.