Product Description

Bosch provides cost-effective and reliable services in the manufacturing and development of various industrial automation components. The company is committed to providing affordable equipment such as drive controllers, servo motors, and brake resistors.

The DDS02.1-W015-RL02-00 model is designed and manufactured by Bosch Rexroth and is widely used in the international market to develop a cost-efficient digital intelligent drive controller. The DDS02.1 drive controller housing is protected under the IP20 protection category but it will not provide any resistance against the penetration of liquids. The controller uses air from inside the control cabinet to maintain the ambient temperature of the module. The controller operating at heat technology cooling method must be installed in a large control cabinet. The continuous current required by the controller is 15 A. The basic unit consumes 150 mA to 500 mA of power during continuous operation. The DDS02.1 drive controller makes an electrical connection with the main supply unit by using a 24 VDC power supply module. During installation, make sure an adequate clearance must be placed at the top, bottom, and sides of the controller. The controller should be installed in the vertical position. The controller uses RSF feedback to control the position and speed of the attached synchronous and linear motors.

The model DDS02.1-W015-RL02-00 is equipped with a single-axis positioning module (DLC02.1) and an additional interface is also provided in this module to connect an INTERBUS-S module. The drive parameters and the firmware module are installed in the firmware module. According to the DDS instruction manual, the average operating temperature for this controller is 0 to +45 degree Celsius, without derating. The controller can perform at its full efficiency when installed under the altitude range of 0 to 1000 m/sea level. Get this drive controller (DDS02.1-W015-RL02-00) today by visiting Wake Industrial.