Product Description

The DDS02.1-W015-RA02-00 industrial drive controller is a sophisticated industrial control device manufactured by Rexroth Indramat to precisely control industrial motors over a broad speed range. This controller is unlike a convectional industrial device as it requires very little input current and can operate smoothly in environmental conditions considered too poor for conventional industrial devices. The DDS02.1-W015-RA02-00 controller is asbestos and silicon-free; it also contains a high metal content, making it possible for industrial operators to recycle it when its usefulness as a drive controller has been exhausted. This industrial drive controller can meet the motor control requirements of a wide range of industrial machines such as metal forming machines, food processing machines, hoisting machines, and lots more.

The DDS02.1-W015-RA02-00 industrial drive controller regulates its internal temperature with an external forced air control mechanism; this temperature regulation system involves the dissipation of hot air outside the control cabinet, it allows industrial operators to install the controller in tight spaces. The communication module used by this industrial drive controller is the analog communication system which is renowned for its speed and efficiency. This industrial drive controller contains special configuration clots labeled from U1 to about U5; these slots are intended to accommodate the configuration modules required by this controller adaptation to specific industrial machines.

The maximum permissible ambient temperature at which the DDS02.1-W015-RA02-00 drive controller can be installed is about 45 degrees celsius; however, during transportation, the controller can be stored at a temperature as high as 75 degrees Celsius. The DDS02.1-W015-RA02-00 industrial drive controller is about 585 millimeters wide and 421 millimeters long,  has a total weight of about 7.5 kilograms.