Product Description

The DDS02.1-W015-DS03-00 is one of the latest and most sophisticated productions of Rexroth Indramat; this controller is designed to monitor and control the operation of electric motor used to generate kinetic energy in the industrial servo system. This controller is an environmentally friendly device that does not generate a high amount of noise during operation; this makes it perfect for operation at any time of the day. The DDS02.1-W015-DS03-00 is safe for industrial operation; however, industrial operators should ensure all the instructions stated by Rexroth Indramat in the documentation of the controller are followed as failure to follow these instructions can lead to a sudden breakdown of the industrial drive controller. This industrial drive controller is about 355 millimeters long and 325 millimeters wide; it also contains special light-emitting diodes, providing the controller with real-time information about its operational status.

The electrical components of this industrial drive controller can generate a leakage current of about 3.5 milliamperes during operation, to prevent electrical accidents, this controller should be properly grounded before it is switched on for operation. The DDS02.1-W015-DS03-00 industrial drive controller can independently detect operational errors and promptly alert the industrial operator by displaying an error message on the display unit connected to the servo system.

The power and motor feedback cable used with this industrial drive controller must be separately routed to prevent electrical interference between the two cables. Integrated into the housing of this industrial drive controller is a fault reset key which industrial operators can use to restart the controller during or after an operational error. Other connection interfaces present on the housing of this industrial drive controller include the drive lockout connection, the motor feedback connection, RS-232 connection, and lots more.