Product Description

Bosch Rexroth provides a sustainable and cost-effective solution to industrial automation problems. The solution comes with products like drive converters, frequency converters, and brake choppers.

The DDS02.1-W015-DA14-00 model is developed and manufactured by Rexroth Indramat to control the various functions of AC servo motors. Only Rexroth-approved products are allowed to be used together with this controller. The model comes with an ANALOG interface as a command communication card. The nominal current required by the model is 15 A and it can be operated by the power supply module prescribed by the company. To control the speed and position of the AC servo motor, the DSS02.1 drive controller is equipped with digital servo feedback that converts the electrical feedback signals generated by the motor. The basic unit of the module consists of 5 plug-in slots that can be customized according to the required functions before startup. Make sure that the controller is damage-free and fully operational, before installation. Don’t install a faulty or damaged controller. The operating software and the parameters are stored in the U5 slot of the controller. It is recommended to make a copy of the firmware module. You can obtain the DDS documentation in your native language from the supplier.

The model DDS02.1-W015-DA14-00 has a rated temperature range of 0 to +40 degree Celsius with 90% derating. With the increase in ambient temperature, the controller efficiency will decrease gradually. You can place this controller under the altitude of 0 to 1000 meters/sea level. A temperature monitoring sensor is also installed in the unit along with a 3.6 V lithium battery. Wake Industrial provides global shipment for this drive controller (DDS02.1-W015-DA14-00) along with a one-year warranty.