Product Description

The DDS02.1-A200-DS54-00-FW drive controller manufactured by Bosch Rexroth comes with empty slots in its basic unit. The controller deploys cold technology cooling method. The product is cooled by airflow outside the control cabinet. The device requires a software module for its functions. This software module encompasses both the drive and firmware parameters. The firmware of the controller must be bought as a separate sub-item. It is updated continuously for accurate functionality without changing the functions. The drive has a version code of 1. The product has an IP 20 degree of protection as per EN 60529 specifications. The configuration rating plate of the device comprises the type designations of the configured controller, the basic unit, the plugin modules and the software module.

The faceplate must be removed from this drive controller when it is mounted and refitted after doing so. The term COVER on a configuration rating plate indicates that the corresponding slot in the product is empty. The fifth slot in the device is intended for plugging in the software module. The unit has a rated current of 200A. Its power section has a DC bus voltage of 300V with a tolerance of +/-15%. The overload factor of the controller can be used to set its continuous current prior to the commissioning with respect to the motor. This DDS02.1-A200-DS54-00-FW controller is available with a one-year warranty period.

The current consumption of the product is the sum of the current consumptions of the connected motor feedback, basic unit and the plugin modules in the basic unit. The device implements digital servo feedback for the associated motor. It functions with derated data if the ambient operating conditions are exceeded. The energy loss of the controller is based on the continuous current of the associated motor in standstill mode. This controller is dispatched to the desired destination in custom military-grade packaging to avoid damage during transit.