Product Description

The DDS02.1-A200-DS24-02 drive controller is a modular device produced by Rexroth Indramat to carry out automation control in the industrial servo system. This device is designed by well-trained engineers according to international quality standards; it is a flexible device that can combine with the MDD, synchronous motor, and the LAR inductance linear motor to form a rapid response drive. This industrial drive controller can meet the operational requirements of sophisticated industrial machines such as textile machines, printing and packaging machines, paper converting machines, and lots more.

The DDS02.1-A200-DS24-02 drive controller is delivered by INDRAMAT as a fully configured unit consisting of a basic unit, a plug-in module, a software module, and the firmware module. All of the configuration modules of this controller are installed into the slots U1 to U5 present in the housing of this device. The rated current required by this drive controller for optimum operation is about 200 Amperes.

The DDS02.1-A200-DS24-02 industrial drive controller operates a closed-loop control system; this means that it uses the digital information it constantly receives from the servo motors to independently monitor and correct any deviation of the motor from the pre-determined operation parameters. The housing of this device meets the IP20 protection class; this housing is specially structured to allow for the easy installation of the drive controller into the external control cabinet. The heat generated by the DDS02.1-A200-DS24-02 industrial drive controller is regulated by forced ventilation, however unlike conventional industrial devices, the excess heat is conducted outside the housing of the controller, which makes it possible for the industrial controller to be installed in small control cabinets without the need for expensive heat exchanging unit.