Product Description

The DDS02.1-A150-DS58-01-FW drive controller from Bosch Rexroth belongs to the DIAX02 product group of controllers from the manufacturer. The drive controller incorporates a modular design. This makes it possible to generate a compact drive package with multiple AC main and servo drives using a single power supply. The product can be used in conjunction with a motor from the manufacturer to function as a drive system. The device is well-suited to be used in machine tools. The unit is connected to the motor with a power cable and a feedback cable. It should be connected to the manufacturer’s power supply with a regulated 24VDC voltage.

The drive controller has to always be worked on only by appropriately qualified personnel. This product has to be installed only in machines used for commercial purposes. The device is to be operated only if the application is in compliance with the related national EMC directives. The unit tends to have high electric voltage during operation. Its earth wire must always be checked for permanent connection as per the connection diagram after installation. The DDS series controller must be protected against indirect contact as per DIN EN 50178 specifications.

The product has a discharge current of more than 3.5mA. The device may move dangerously due to faulty control of the associated motor. The unit depicts a protection rating of IP 20 in accordance with EN 60529 specifications. It must be ensured that the drive is in standstill mode before entering the danger zone. This drive controller must neither be pinched nor crushed when it is handled or installed. This product in the configured state has a basic unit, firmware, plugin modules and a software module. The device has a series code of 02. This controller comes with a one-year backing and can be shipped to any global destination.