Product Description

The Bosch Rexroth DDS02.1-A150-DL01-01-FW is a modular drive controller. The output current rating of the controller is 150 Amps. The permissible ambient temperature with rated data is 0 to 45 degrees Celsius. The maximum permitted ambient temperature with derated data is 55 degrees Celsius. The output of the controller derates to 80% of rated values at 55 degrees Celsius. The temperature range specified by Bosch for storage and transportation of the DDS02.1-A150-DL01-01-FW is -30 to 85 degrees Celsius. The maximum permitted elevation with rated data is 1000 meters above sea level. The controller output derates to 65% at 5000 meters altitude. The maximum permitted operating relative humidity is 95%. The DDS02.1-A150-DL01-01-FW comes in an IP10 rated enclosure that is designed for panel mounting. The unit is not protected against water penetration or intentional accessing by hand.

Weight of the controller is approximately 11 kilograms. DC bus voltage on the DDS02.1-A150-DL01-01-FW is 300 Volts which can vary up to ±15%. The controller has the advantage that most of the energy dissipated by the unit is directly conducted outside the bus and does not accumulate inside the control cabinet. The controller can be mounted inside compact control cabinets without requiring extensive heat conductance or costly heat-exchanging unit. The electrical section of the blower is protected within the control cabinet. The DDS02.1-A150-DL01-01-FW controller supports digital servo feedback. The communication module shipped with the controller is single axis position control. The product firmware needs to be added as a separate subposition. Only trained and qualified technical personnel should handle and install the DDS02.1-A150-DL01-01-FW controller. Safety instructions listed in the product documentation should be implemented to prevent injury and equipment damage.