Product Description

The DDS02.1-A100-DS53-00-FW drive controller from Bosch Rexroth has a modular design. This drive controller belongs to the DIAX02 product group of such controllers. The modular design makes it possible to connect several AC main and servo drives with a single supply unit. The product can be used with the manufacturer’s MDD and MKD range of motors to function as a rapid-response drive. The device is connected to the motor using a power cable and an encoder cable. This unit is meant to be connected to the manufacturer’s power supply with a regulated 24VDC voltage rating. It is meant to be operated only after reading and writing the associated documentation by qualified and trained personnel.

This product should be assembled, installed, transported and stored correctly for safe and optimal operation. The device belongs to the DDS series of drive controllers. The unit tends to have high electrical voltage during operation. It has a very hot surface during operation. The controller must be protected against direct contact as per DIN EN 50178 specifications. The product may exhibit dangerous movements at any point in time when it is being used. The device should be in standstill mode before entering the danger zone. The unit might pose a risk of injury due to improper handling.

The controller comes with a series code of 02. Its basic unit can be fitted with multiple modules to perform various functions. The product includes both hardware and firmware in its configured state. The basic unit incorporates heat technology resulting in cooling by airflow inside its control cabinet. It requires minimum installation and mounting efforts. The device has IP 20 degree of protection in adherence with EN 60259 specifications. The drive and firmware parameters of the unit are stored in the software module. This drive controller has a one-year warranty backing and can be transported all over the world.