Product Description

The DDC01.2-N200A-DS68-00-FW is a DDC-type Drive Controller from Rexroth Indramat. It weighs 22 kg and has a maximum regenerated power of 20 kWs. The peak current rating of this unit is 200 Amperes, and its average continuous current rating is 45 Amperes. It is designed for direct feeder installation even under harsh manufacturing and environmental conditions. The DDC01.2-N200A-DS68-00-FW features a pulse frequency of 4 kHz, and its power requirement at maximum drive load is 22.5 kVA.

A basic unit of the DDC01.2-N200A-DS68-00-FW comes with a bleeder resistor, a mains contactor, a power section and a DC bus converter. It also boasts five slots for plug-in cards, and its protection category is IP 65, according to IEC 529. The installation of this unit is space-saving, and it is easy to service. It has a maximum mounting elevation of 1000 meters ASL without derating specifications. The relative humidity rating of the DDC01.2-N200A-DS68-00-FW has a maximum value of 0.95 and a minimum value of 0.05. Similarly, it has an absolute humidity of 25 g water/m³ air. During operation, condensation and conductive dirt contaminant are prohibited. The bleeder resistor on this unit gives off a lot of heat during operation and must maintain a minimum allowance of 300 mm from flammable materials.

The cooling mechanism of the DDC01.2-N200A-DS68-00-FW is manufacturer-specified, and its version type and series are 2 and 1 respectively. It has a digital servo feedback system and leverages a SERCOS interface command communication module. Its function code designation is 68, and it has a function code version of 01. Its standard motor noise emission occurs between a rated current of 100 Amperes to 200 Amperes. The firmware of the DDC01.2-N200A-DS68-00-FW must be ordered as a separate item. This unit can be shipped globally with a one-year warranty period from Wake Industrial.