DDC01.2-N200A-DS24-03-FW

  • Rated 4.4 (8 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: R911276294
  • Call for Expedited Shipping and Product Condition Options
The DDC01.2-N200A-DS24-03-FW Servo Compact Controller is anufactured by Rexroth Indramat Bosch. This controller has a Not Specified cooling type, a rated current of 200 A and a Standard (100 A? 200 A rated current) Noise Emission at Motor. This DDC Controller has a(n) SERCOS Command Module.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

DDC01.2-N200A-DS24-03-FW

  • Rated 4.4 (8 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: R911276294
  • Call for Expedited Shipping and Product Condition Options
The DDC01.2-N200A-DS24-03-FW Servo Compact Controller is anufactured by Rexroth Indramat Bosch. This controller has a Not Specified cooling type, a rated current of 200 A and a Standard (100 A? 200 A rated current) Noise Emission at Motor. This DDC Controller has a(n) SERCOS Command Module.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Sell Us Your Surplus
Have a DDC01.2-N200A-DS24-03-FW to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

The Rexroth Indramat DDC01.2-N200A-DS24-03-FW is a digital servo drive which is designed for control of servo motors. An advanced digital signal processor on the drive performs drive control and monitoring function. The drive is capable of high-resolution measurements of position across the speed range. The DDC01.2-N200A-DS24-03-FW is available with a IP 65 rated basic unit which contains slots for modules that can be installed to match the drive to the application. Two slots on the basic unit are fixed for the software module and command module. The DDC01.2-N200A-DS24-03-FW comes with a SEROC command module. Three slots on the basic unit of the DDC01.2-N200A-DS24-03-FW are available for optional plug in cards. Height of the drive basic unit is 517 millimeters, its depth is 298 millimeters and its width is 165 millimeters.

The DDC01.2-N200A-DS24-03-FW supports digital servo feedback. The function code and function code version for the drive are 24 and 01 respectively. The noise emission rating of the DDC01.2-N200A-DS24-03-FW is standard. The output current rating of the drive is 200 Amps. Input side of the drive can be connected to three-phase 220 / 230 Volts AC mains supply. Approximate weigh of the drive basic unit is 22 kilograms. The motor power connection is located at the bottom side of the drive. A rating plate and slots for the plug in modules are located on the front panel of the DDC01.2-N200A-DS24-03-FW. A single RS-232 port on the front panel can be used to interface with a programming PC or VT-100 terminal. A two-digit display shows warning and error messages which assist during troubleshooting. Handling, installation, commissioning and operation of the drive should be performed by trained and qualified personnel. This unit can be shipped globally with a one-year warranty period from Wake Industrial.

  • DDC012N200ADS2403FW
  • DDC01 2 N200A DS24 03 FW
  • ddc01.2-n200a-ds24-03-fw
  • DDC1.2-N200A-DS24-03-FW

DDC01.2-N200A-DS24-03-FW Technical Specifications

Command Module: SERCOS
Cooling Type : Not Specified
Noise Emission at Motor: Standard (100 A? 200 A rated current)
Rated Current: 200 A
Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo