Product Description

The DDC01.2-N200A-DS03-02-FW industrial controller is a highly advanced controller produced by Rexroth Indramat. This controller is designed to carry out motor control in the industrial servo system, the controller features the latest technological design, thus it can be used with a broad range of industrial production systems such as assembly systems, packaging systems, food processing machines, and lots more. The DDC01.2-N200A-DS03-02-FW controller is designed with an efficient housing unit that allows for the easy movement of air in and out of the controller. The controller is a three-phase controller, however, it can be configured to carry out single phase positioning control through the installation of the DLC single-axis positioning module into the controller. Other modules used for the configuration of this controller include the DSM software module, the DBS inter bus interface module, and the DEA 4.1, DEA 5.1, and DEA 6.1 auxiliary plug-in modules.

The DDC01.2-N200A-DS03-02-FW electrical drive controller is designed to resist industrial conditions considered unfavorable for convention controllers. The controller also contains an internal fan and a heatsink which helps to keep the temperature in the controller’s housing unit within the tolerated temperature range. This controller can operate with an input voltage of either 3x 220 volts or 3x 230 volts. This controller can support a maximum drive load of 33 kilowatts at this maximum loading, the DDC01.2-N200A-DS03-02-FW has a power requirement of 22.5 kilovolts per Ampere. The DDC01.2-N200A-DS03-02-FW also weighs approximately 22 kilograms.

The DDC01.2-N200A-DS03-02-FW industrial controller should be operated at ambient temperatures that fall between +5 to +45 degrees Celsius. If the controller is not required for immediate operation, then it should be stored or transported in ambient temperatures that fall between -30 to + 85 degrees Celsius. This unit can be shipped globally with a one-year warranty period from Wake Industrial.