Product Description

The DDC01.2-N200A-DL01-01-FW is a drive controller that comes with a single-axis positioning control design. It is manufactured by Bosch Rexroth Indramat, and its peak current is 200 A. It has an average continuous current of 45 A. Also, the pulse frequency of this unit is rated 4 kHz, and its power requirement is 22.5 kVA. The design type of this model is 2, and it is a line 1 DDC product. It is efficient in operations and utilizes a Digital Servo feedback mechanism. The Ingress Protection (IP) class of the DDC01.2-N200A-DL01-01-FW is 65. It is controlled by microprocessors and provides precise controls over a wide speed range. In general, DDC drive controllers can be configured to serve specific purposes.

The DDC01.2-N200A-DL01-01-FW is resistant to jet water and dust, and it boasts a DC bus converter/bleeder resistor. The installation height recommended for optimum performance is 1000 meters ASL. Regardless, the DDC01.2-N100A-DL01-01-FW is usable at an altitude higher than 1000 m, but a performance reduction will occur. The power connections on this drive controller can be protected using circuit breakers and gL-type fuses. The dynamic braking system halts the system to a standstill if a system failure occurs, and the DC bus induces a short-circuit in the advent of faults. The firmware on the DDC01.2-N200A-DL01-01-FW must be purchased separately, and its function code version is 01. Its function code is also 01.

 All nominal conditions and ambient ratings of the DDC01.2-N200A-DL01-01-FW applies at a temperature range of 5 ^oC – 45 ^oC. Also, the peak temperature is 55 degrees Celsius with reduced data. It has a DSM software module that stores parameters necessary for specific use cases. If overvoltage occurs, the DDC01.2-N100A-DL01-01-FW can be shielded against advert effects by connecting it across a transformer. This unit can be shipped globally with a one-year warranty period from Wake Industrial.