Product Description

The DDC01.2-N200A-DA07-02-FW by Bosch Rexroth is an IP 65-rated DDC01 drive controller. Generally, drive controllers aid the control of electrical motors and monitor their operations. The max. current of the DDC01.2-N200A-DA07-02-FW is 200 A, and its operating frequency is within the range of 50 to 60 Hz. Also, the input voltage rating of this unit is 3x 230 V (+10%/-15%) or 3x 220 V (+15%/-10%). The average continuous current is 45 Amperes, and it has a PWM frequency of 4 kHz. On average, a basic unit of the DDC01.2-N200A-DA07-02-FW weighs 22 kg.

With a duty cycle time equals 100 seconds, the DDC01.2-N200A-DA07-02-FW exhibited a 50 % short-term current rated at 70 Amperes. The acceptable absolute humidity is 5 % (min) and 95% (max), and its absolute humidity rating is 25 g water/m³ air. During operation, storage and transportation, condensation or dirt contaminants are not allowed. IP 55 rated three-phase autotransformers are suitable for linking the connecting voltage of DDC01 drive controllers to the mains voltage. It utilizes a firmware that must be ordered as a separate sub-item. When the load on the DDC01.2-N200A-DA07-02-FW is maximum, its power requirement is rated at 22.5 kVA. Also, it has an average continuous mechanical load rating of 7.5 kW and a usable peak mechanical load of 33 kW.

The motor feedback mechanism utilized by this unit is the digital servo feedback type. It also uses an analog interface command module for digital communications. The function code of the DDC01.2-N200A-DA07-02-FW is 07 and the function code version is 02. At 1000 meters above sea level, the maximum permissible mounting altitude is attained, and at greater altitudes, the power/torque ratings of the DDC01.2-N200A-DA07-02-FW reduces and affects its overall output. This unit can be shipped globally with a one-year warranty period from Wake Industrial.