Product Description

The DDC01.2-N200A-DA02-01-FW is an intelligent DDC drive controller from Bosch Rexroth Indramat. it is a series 1 drive controller, and its version is 2. This unit boasts a standard design and comes with five module slots U1 – U5. These slots are available for aux. modules, command interface card and a software module. The installation requirement of this unit is space-saving, and it can be positioned directly under the feeder unit. It weighs about 22 kg and has a power requirement of 22.5 kVA. The approximate usable mech. peak load of the DDC01.2-N200A-DA02-01-FW is rated at 33 kW, and its continuous mechanical load has an average value of 7.5 kW.

The operating system of the DDC01.2-N200A-DA02-01-FW is contained in its software module which allows it to perform application-specific functionalities. Also, the functions of this unit are facilitated by Digital Servo feedback and an ANALOG command communication interface. The cooling mechanism utilized by the DDC01.2-N200A-DA02-01-FW is natural convection, and its standard noise emission occurs between 100 to 200 Amperes at the motor shaft.

The DDC01.2-N200A-DA02-01-FW is a typical three-phase drive controller with dynamic and efficient control characteristics. In addition, the peak current rating of this equipment has a value of 100 Amps. It offers excellent control/monitoring/parameterization features. The protection class of this variant of the DDC01 unit is IP 65, and it offers excellent results in control applications under the ingress of dust and jet water. Similar to several other DDC variants, the DDC01.2-N200A-DA02-01-FW is a maintenance-free equipment. In addition, the design of this controller conforms with Class-A equipment; and for this reason, it can cause radio interference in residential areas if suppression filters are not used. This unit can be shipped globally with a one-year warranty period from Wake Industrial.