Product Description

Bosch Rexroth products such as servo drives, servo motors, and operator terminals are extensively used in the international market.

The DDC01.2-N100A-DS69-00-FW model is leading the world in the field of energy-efficient motion control systems. The DDC01.2 servo drive is designed and manufactured by Rexroth Indramat and it is typically used for NC machine tools, mounting systems, and printing machines. Indramat MDD AC servo motors are allowed to operate in conjunction with the digital intelligent AC servo drive module. The drive is completely protected against the ingress of dust and low-pressure water jets from every direction. The drive enclosure is protected under IP65 protection standard and it is capable to operate under humid conditions. The DDC01.2 servo drive dissipates 500 W of power while operating at the continuous current of 35 A. The model is designed to operate at the rated current of 100 A. The model can be configured by installing various plug-in modules into the U1 – U5 slots of the basic unit. The firmware module DSM 2.1 contains the drive parameters and the operating software. Firmware should be installed in the U5 slot of the basic unit and it can be duplicated for storage purposes.

The model DDC01.2-N100A-DS69-00-FW comes with a DSS 1.1 SERCOS interface that helps in performing real-time communication between the drive, motor, and other I/O devices. The motor speed and position can be controlled with the help of digital servo feedback. A seven-segment H1 diagnostic display is placed in DCC01.2 for diagnosing errors and faults. The drive is equipped with a bleeder resistor and a blower unit is installed for cooling purposes. The model can operate without derating, at the maximum temperature of +45 degree Celsius and at the maximum altitude of 1000 m/sea level. Order this servo drive (DDC01.2-N100A-DS69-00-FW) from Wake Industrial and receive it at your place along with a one-year replacement warranty.