Product Description

The DDC01.2-N050C-DA01-01-FW is a 50 Amps rated drive controller. It is designed for motor control applications by Rexroth Indramat. The controller has a standard noise emission rating. Motor feedback is supported through an integrated digital servo interface. Command module on the DDC01.2-N050C-DA01-01-FW is analog which permits the drive to be operated with conventional controllers via an analog interface. The analog command communication card also controls input and signal outputs for the communication with connected controllers. The analog command control outputs incremental encoder signals for use as position values. Slot U1 on the controller is designated for the command module. Function code of the DDC01.2-N050C-DA01-01-FW is 01 and the version of function code is also 01. To ensure controller matching with the application, Rexroth requires that the firmware be ordered separately from the controller.

Input of the DDC01.2-N050C-DA01-01-FW can be connected to three-phase 220 Volts AC or 230 Volts AC. An intermediate transformer is only required if the AC mains supply is not 220 / 230 Volts AC. The input frequency range is 50 to 60 Hertz. The continuous or average current output of the DDC01.2-N050C-DA01-01-FW controller is 25 Amps. The power loss at maximum device load without bleeder power loss is 500 Watts. The continuous bleeder power is 0.25 kilowatts and the peak bleeder power is 10 kilowatts. Weight of the controller basic unit is 21 kilograms. Height of the controller is 65 millimeters, the depth is 295 millimeters and the width is 165 millimeters. A configuration rating plate is attached to the front of the controller. The front panel also contains a fault reset key, a status display for warning and error messages and the slots for plugin modules. This unit can be shipped globally with a one-year warranty period from Wake Industrial.