Product Description

The DDC01.1-K200A-DL02-00 current drive manufactured by Bosch Rexroth is a three-phase drive. The drive is characterized by high dynamics and precision. The control, monitoring, diagnosis and parameterization of the product are done digitally by means of a signal processor. The device functions as a single-axis positioning controller when it encompasses a one-axis positioning module. This positioning module features a user-oriented programming language and inputs of up to 3,000 program blocks. These program blocks feature input queries, speed and position entries, output settings and more. The supply module of a drive package must be connected directly to a 3 x 280 to 460VAC, 50 to 60Hz mains.

The drive controller is integrated with a mains rectifier. The product is widely deployed in transfer systems. The device can be directly fitted on a forward feed unit. It comes with a 1 series code. The basic unit encompassing various auxiliary plug-in modules as well as a matching software module is termed as a configured drive controller. The bleeder resistor in the basic unit is capable of absorbing the energy that is generated during a braking action. The auxiliary modules are inserted in the U1 to U4 slots of the basic unit. The DDC01.1-K200A-DL02-00 drive has a warranty tag for a year.

Each program block of the drive controller indicates a specific state of inputs or one motion sequence that must be monitored. The front panel of this positioning module features a 34-pin plug-in connector as well as a 9-pin D-sub plug-in connector. The drive-specific parameters are stored in the feedback of the connected MDD motors. These parameters are activated based on the need at the time of commissioning. The auxiliary plug-in modules can either be input/output interfaces or interbus S interface modules or both. The product comes with IP 65 degree protection. This drive can be transported to your destination without any damage through reputed logistics partners.