DDC01.1-K150A-DS01-01

  • Rated 4.6 (13 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: R911264406
  • Call for Expedited Shipping and Product Condition Options
The DDC01.1-K150A-DS01-01 Servo Compact Controller is anufactured by Rexroth Indramat Bosch. This controller has a Air, Natural Convention cooling type, a rated current of 150 A and a Standard (50 A? 200 A rated current) Noise Emission at Motor. This DDC Controller has a(n) SERCOS Command Module.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

DDC01.1-K150A-DS01-01

  • Rated 4.6 (13 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: R911264406
  • Call for Expedited Shipping and Product Condition Options
The DDC01.1-K150A-DS01-01 Servo Compact Controller is anufactured by Rexroth Indramat Bosch. This controller has a Air, Natural Convention cooling type, a rated current of 150 A and a Standard (50 A? 200 A rated current) Noise Emission at Motor. This DDC Controller has a(n) SERCOS Command Module.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Repairs
Sell Us Your Surplus
Have a DDC01.1-K150A-DS01-01 to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

The DDC01.1-K150A-DS01-01 servo drive made by Bosch Rexroth has a configuration designation code of DS01-01. The product can render maintenance-free operation. The motor feedback cable is connected on the top of the device through a cable lead-through. The X2 connector of the unit features a RS 232 interface for connection to a VT-100 or a PC terminal. The motor power connection, mains connection, and blower connection are located at the bottom of the drive. The fault reset key helps in clearing the displayed error messages. The slots for the command interface card and the auxiliary plug-in modules of the product are present at the bottom half of its front panel.

The drive can be installed in machines and facilities such as sequential finishing machines and transfer facilities. The product is mostly insusceptible to interference. The signal lines of the device must be grounded with shields. The unit must have a ground connection as per the manufacturer’s guidelines. Its control and signal leads, as well as power cables, should be routed at a distance of at least 10cm from each other. They should be routed in separate cable ducts. The drive controller must not be connected to a VT-100 terminal or a PC when it is carrying a current.

The motor associated with the servo drive must be earthed to its drive controller. The housing of this controller should be connected to the machine chassis for electrical conductivity. The parameters associated with this drive and its DLC module must always be programmed before the drive is started. The product has a leakage current of more than 3.5mA. Its electrical contacts should never be touched during operation. The H1 display of the device shows the AF message when the drive is powered ON. The servo drive is available with a warranty for one year and can be shipped across the globe.

DDC01.1-K150A-DS01-01 Documents

  • DDC011K150ADS0101
  • DDC01 1 K150A DS01 01
  • ddc01.1-k150a-ds01-01
  • DDC1.1-K150A-DS01-01

DDC01.1-K150A-DS01-01 Technical Specifications

Command Module: SERCOS
Cooling Type : Air, Natural Convention
Noise Emission at Motor: Standard (50 A? 200 A rated current)
Rated Current: 150 A
Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo