Product Description

The DDC01.1-K150A-DG01-00 servo drive manufactured by Bosch Rexroth encompasses a DG01-00 configuration designation. The product comes to a standstill and is shut down automatically if the power stage of its drive controller has a very high temperature. The brushless device is controlled by a microprocessor. The basic unit in its configured state is integrated with a configuration rating plate, a software module, an auxiliary plug-in module if needed, and a one-axis DLC positioning module. Its mains section is used for the control voltages. The drive-specific parameters are stored in the feedback associated with the connected MDD servomotor. The input/output interface of the drive has several functions such as signaling the fault messages as well as operating mode, e-stop input, and more.

The information on the configuration rating-plate of this device assists in fitting a new basic unit or replacing a problem part quickly. The software module associated with this unit is always installed in the U5 slot. The servo drive must be commissioned before operation. This commissioning must take place only after ensuring that the configuration is as per what is specified on the rating-plate. The drive controller should always be mounted on a forward feed unit after ensuring that there is no restriction to the airflow into and out of the machine.

The drive has a length of 517.5mm without the blower and 657.5mm with the blower. Its auxiliary plug-in modules are fitted in the U2, U3, and U4 slots. The device can be connected to a PC or a VT-100 terminal through its X2 connector using an RS-232 interface. The product features an S1 fault reset key on the top part of its front panel. The heatsinks and blower mesh of the unit tends to become very dirty when it is operated in a highly polluted environment. The servo drive with a year’s warranty can be dispatched to any address across the world.