Product Description

The Rexroth Indramat DDC01.1-K100A-DL20-00 is an intelligent AC servo drive. It is a microprocessor controlled three-phase current drive with very accurate drive features. A signal processor on the drive performs drive control, diagnosis, monitoring and parameterization for the motor rotor position. The DDC01.1-K100A-DL20-00 is equipped with a DLC single-axis positioning module. This enables the drive to be operated as a single-axis positioning controller. The rated current for the DDC01.1-K100A-DL20-00 is 100 Amps. It is an air cooled drive with standard noise emission at the motor. Configuration designation for the drive is DL20-00. Protection rating of the drive hosing is IP 65. The drive controller and a mains rectifier are housed in the same unit. The DDC01.1-K100A-DL20-00 is a modular drive comprised of a basic unit, the DLC unit, a software module and plug-in modules.

Slot U5 on the DDC01.1-K100A-DL20-00 drive is dedicated to the software module. This module can be removed from a faulty drive and placed into a replacement drive to minimize system downtime. Slot U1 on the drive is dedicated for the DLC positioning module. Slot U2 to U4 are available for additional plug-in modules. The DDC01.1-K100A-DL20-00 is designed for controlling MDD series servo motors. The drive supports digital servo feedback. Function code for the drive is 20 and the function code version is 00. Programming of the DDC01.1-K100A-DL20-00 is performed from a CTA programming and display unit. The maximum CTA to drive cable length is 30 meters. Input voltage rating for the digital drive is three phase 220 Volts AC or three-phase 230 Volts AC. The power requirement with maximum drive load is 18 kVA. The permissible ambient temperature for rated specifications is 5 to 45 degrees Celsius. This unit can be shipped globally with a one-year warranty period from Wake Industrial.