Product Description

The DDC01.1-K100A-DL02-01-FW is a microprocessor-controlled AC servo drive from Rexroth Indramat. The design of this drive is brushless, and it offers high dynamics and precision. Also, it is a 3-phase drive, and it features precise servo-control, monitoring, diagnostics operations and parameterization. The DDC01.1-K100A-DL02-01-FW is able to provide precise servo-control because of the high-resolution positional measurements of its rotor over a large range of speed. It weighs about 35 kg. Generally, a completely and appropriately assembled DDC unit is made up of a command interface card, auxiliary modules, etc.

The class of protection of this DDC01.1-K100A-DL02-01-FW is IP 10, and it features a space-saving installation. The software module utilized by this servo drive is the DSM 2.1 type. The peak current of this Rexroth DDC drive is 100 Amps, and its acceptable relative humidity is maximum at 95%. In addition, the admissible absolute humidity is rated at 25 grams water/m³ air.  As per IEC 529, the ingress protection category of the DDC01.1-K100A-DL02-01-FW is rated at IP 65, and it is shielded from the ingress of dust and jet water. The shipping and storage temperature of this equipment is within the range of -30 to 85 degrees Celsius.

During installation, the maximum acceptable altitude at rated specifications is 1000 meters above sea level. When operating the DDC01.1-K100A-DL02-01-FW at derated specifications, the maximum admissible environmental temperature is 55 degrees Celsius. To conveniently use this equipment in light industrial and residential areas, an rf suppression filter will be required to preserve the radio interference emission limits. The power connections on the DDC01.1-K100A-DL02-01-FW can be shielded by gL-type fuses or circuit breakers, depending on the scenario. This unit can be shipped globally with a one-year warranty period from Wake Industrial.