DDC01.1-K100A-DC04-01-FW

  • Rated 4.6 (22 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: R911268430
  • Call for Expedited Shipping and Product Condition Options
The DDC01.1-K100A-DC04-01-FW Servo Compact Controller is anufactured by Rexroth Indramat Bosch. This controller has a Air, Natural Convention cooling type, a rated current of 100 A and a Standard (50 A? 200 A rated current) Noise Emission at Motor. This DDC Controller has a(n) Interbus-S Interface Command Module.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

DDC01.1-K100A-DC04-01-FW

  • Rated 4.6 (22 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • MPN: R911268430
  • Call for Expedited Shipping and Product Condition Options
The DDC01.1-K100A-DC04-01-FW Servo Compact Controller is anufactured by Rexroth Indramat Bosch. This controller has a Air, Natural Convention cooling type, a rated current of 100 A and a Standard (50 A? 200 A rated current) Noise Emission at Motor. This DDC Controller has a(n) Interbus-S Interface Command Module.

Request a Quote Request Repair

Standard Repair Time is 1 - 2 weeks. 4 Day Rush Repair options are available.

Warranty
1 Year Wake Industrial Warranty Included
Shipping
Worldwide shipping via DHL, UPS, and Fedex
Sell Us Your Surplus
Have a DDC01.1-K100A-DC04-01-FW to sell?
To Speak to a sales representative for pricing and lead time:

Product Description

The DDC01.1-K100A-DC04-01-FWAC servo drive made by Bosch Rexroth is a current drive. This digital AC drive comes with an S1 fault reset key and an H1 status display on its front panel. The product is not susceptible to circuitry interference. The control and signal leads of the device as well as power cables must be routed through separated cable ducts whenever possible. The unit supports the application of 3 x 230VAC +10% -15% to the drive controller. Its components must be compatible with the respective mains voltage. The drive controller housing should be connected to the machine chassis for electrical conductivity.

The control, monitoring, diagnosis, and parametrization of the AC drive are digitally performed using a signal processor. The product can be equipped with a one-axis positioning module. This module supports a user-oriented programming language. The basic unit of the drive controller for the device is designed with a DC bus rectifier, a bleeder resistor, and a mains section. The resistor absorbs the energy during braking while the mains section is used for control voltages. The U1 to U5 slots in the basic unit can be used to insert various plug-in modules based on the drive functionality.

The drive-specific parameters that are determined by the manufacturer are loaded in the feedback of the connected motor and are activated at the time of commissioning. The fifth slot in the basic unit is reserved for the insertion of its software module. The air outlet of the device should be kept at a minimum distance of 300mm from flammable parts or materials so that they are not affected by the hot stream of air. The product features a provision for inserting the motor feedback cable at its bottom. We can send the servo drive to any global address, with a warranty for a year.

DDC01.1-K100A-DC04-01-FW Documents

  • DDC011K100ADC0401FW
  • DDC01 1 K100A DC04 01 FW
  • ddc01.1-k100a-dc04-01-fw
  • DDC1.1-K100A-DC04-01-FW

DDC01.1-K100A-DC04-01-FW Technical Specifications

Command Module: Interbus-S Interface
Cooling Type : Air, Natural Convention
Noise Emission at Motor: Standard (50 A? 200 A rated current)
Rated Current: 100 A
Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo