Product Description

The DDC01.1-K050A-DL02-00 digital servo drive from Bosch Rexroth functions as a digital positioning controller with one axis when it is used with the appropriate positioning module. This positioning module permits the monitoring of one motion sequence while executing the next program block at the same time. The basic unit of the drive has a bleeder resistor that absorbs the energy during the braking action. The parameters of this device are stored in the software module. The term COVER in the configuration rating plate of the unit indicates that a particular slot is empty. The drive is cooled by air circulation outside the control enclosure.

This servo drive has a noise emission of A at the motor end. The product can be connected to an AC MDD series servomotor from the same manufacturer. The device mounting must be done such that there is no restriction to the exit or entry of cool air from or to the machine. The heatsink and blower mesh have chances of becoming extremely dirty if the drive functions in a highly polluted environment. This dirt contamination can affect their performance and hence they must be cleaned. Its motor feedback cable is connected to the underside of the drive via a cable lead-through.

The rating plate is fitted on the front panel of the servo drive. The U1 slot on the front panel is used to fit the single-axis positioning control command module. The product has a long lifespan because of the currentless switching action. It is integrated with the mechanism to monitor as well as control the holding brake of the connected motor. The signal cables of the device are connected through screw terminals. The unit can be decelerated or slowed down if its electronic circuitry encounters any kind of trouble and can later be stopped. The DDC01.1-K050A-DL02-00 drive has a warranty valid for one year and can be shipped to any address across the world.