Product Description

The CSH02.1B-CC-EC-NN-L3-DA-NN-FW advanced control section is smaller than the power section of the drive controller. This Bosch Rexroth section cannot be used if the operating conditions do not meet the ambient conditions. The product may cause an electric shock due to a tampering action done on it. This device has live electrical connection points during the operation phase. The unit operation is not allowed near high-frequency equipment. It takes up to 15 minutes to cool down post the operation period. This product comprises a type plate with its type designation. The device is connected to the encoder of the motor at the X4 connecting point.

This section supports encoder systems that have a supply voltage of 5V or 12V. The unit portrays connectivity with the DA optional module at the X37 connector using a connecting cable with AWG 24 to 16 thickness. Its Safe Torque Off safety module encompasses two dynamization outputs and two inputs for the selection of channels. This product comprises an advanced control panel to assist in its operation. The device requires a separate power supply for its isolated inputs as well as outputs. Its optional modules have  low power consumption if several components are fitted. This control section comprises a warranty period of one year.

The section must use wire ends without ferrules for wiring its spring terminals as far as possible. This product can trigger property damage if it is not used in the appropriate way. The device featuring a drive controller has to be programmed before its commissioning for the motor to execute the application-specific functions. This unit must adhere to the safety regulations of the country in which it is operated. Its drive controller may move dangerously at any point of time during the operation period because of a fault in the way the motor is controlled. The CSH02.1B-CC-EC-NN-L3-DA-NN-FW control section transportation is undertaken by reputed freight carriers.