Product Description

Bosch Rexroth has a wide range of products that can meet the needs of any customer, from small businesses to large industrial operations. In addition to motors, Bosch manufactures electric drives and control systems.

The CSH01.3C-S3-EN2-EN2-CCD-S2-S-NN-FW model has a single RS232 serial interface and a 250-microsecond SERCOS cycle time. Before performing various application activities, it is necessary to calibrate the model's four digital outputs and one analog input. Option 1 for this CSH01.3 control section is a 6-watt EnDat2.1 encoder. Additionally, the model has a convenient control panel that uses 1 watt. Option three of this model includes a cross-communication drive that consumes 1-watt power and is often used in printing equipment and food packaging. The PWM frequency of the control section may be adjusted in 2 kHz increments between 2 and 16 kHz. The device’s firmware has several functions. However, it must be bought individually. The CSH01.3 control section has a 1 W-consuming SERCOS 3 master communication module. Do not install or use the electric drive and control system components until reading the whole handbook. The model must be put in its authorized drive controller and utilized under specified environmental conditions.

The model CSH01.3C-S3-EN2-EN2-CCD-S2-S-NN-FW has a 1-watt S2 (safe motion) safety motion. The model features four digital outputs, a control range of 62.5 to 125 microseconds for the current and a control range of 250 to 500 microseconds for the position. Various device variations with varying drive power and interfaces exist to allow application-specific use of the drive controller. This item (CSH01.3C-S3-EN2-EN2-CCD-S2-S-NN-FW) is available for shipment from Wake Industrial to the provided location. The company relies on a respected logistics partner for international shipment.