Product Description

CSH01.3C-PB-ENS-EN1-CCD-S2-S-NN-FW is a digital control section. It is designed by Bosch for its IndraDrive controllers. A range of control sections is available, including basic, advanced, and basic-universal control sections. Some of the control sections are designed for single-axis applications and some are designed for double axis applications. The CSH01.3C-PB-ENS-EN1-CCD-S2-S-NN-FW belongs to the category of advanced control sections. It is designed for single-axis applications. It features an encoder IndraDyn module, an encoder HSF/RSF module, a cross-communication module and a safe motion safety module. Power consumption of the control section is 8.5 Watts. The power consumption of each encoder module is 6 Watts. Power consumption of the Profibus master communication module is 2 Watts. The cross communication module draws 1 Watt power. The control section works with a standard control panel. Operators must order firmware for the unit separately.

Operators and their staff must verify equipment at the time of delivery. To make identification easier, staff must check the type plates Bosch provides on each unit. The control section has two type plates and that identify the control section and installed firmware. Each of the type plates lists specifications and other relevant information. Bosch supplies accessories for control sections including fiber optic cable connectors, signal level converters, and adapters. Connection points on control sections have either spring terminals or screw terminals. When connecting two conductors at one terminal point, Bosch recommends using wires of the same cross section and use of stranded wires with 0.5 to 1 mm² cross section. Only personnel with proper training and experience should install and operate control sections and other industrial equipment from Bosch Rexroth. Failure to adhere to recommended safety precautions can lead to severe injury and property damage.