Product Description

The CSH01.3C-PB-EN2-MA1-CCD-L2-S-NN-FW advanced control section manufactured by Bosch Rexroth has to be handled only by trained personnel. This section supports a limited number of plug-in and removal actions. The product is designed to be operated only after confirming that the prerequisites for its appropriate use are fulfilled. This device-associated drive controller may need additional actuators and sensors for monitoring and controlling it. The unit is suitable for single-axis and multi-axis drive and control tasks. It must be operated only under the indicated assembly and installation conditions. This section features electric components with a voltage rating of more than 50V.

The product is meant to be prevented from unintentional startup by implementing appropriate measures. This device operation is not allowed near high-frequency equipment. The unit may pose health hazards for people with pacemakers. It is necessary to perform a risk assessment for the machine in which the installation is done. This section can cause burns if its hot surface is touched with bare hands. The product is smaller in size than its drive controller-associated power section. This device must adhere to the relevant statutory regulations pertaining to accident prevention to avoid untoward consequences. This CSH01.3C-PB-EN2-MA1-CCD-L2-S-NN-FW control section is dispatched worldwide.

The product must not be in a pressurized state when it is being dismounted. The device is configurable and is equipped with a single axis. This unit has one of five possible switching frequencies. Its serial interface is connected with a serial interface at the X2 connecting point with a stranded wire connection. This section requires the incorporation of an external supply voltage at the X31.8 and X31.9 connecting points for its digital I/Os. The product supports Safe Torque Off safety technology with the appropriate optional module. This device has no support for bus wiring. The control section features one-year backup support.