Product Description

The CSH01.3C-NN-EN2-MEM-CCD-L2-S-NN-FW advanced control section provided by Bosch Rexroth is smaller than the power section of the drive controller. This section must operate only in the specified configuration as well as a combination of components. The product is not to be used even for a brief period without the permanent connection of its equipment grounding conductor. This device-associated dangerous movement may take place at any time during operation if the motor has a wrong input of parameters before commissioning. The unit comprises one vertical axis that must be secured against falling after the power supply is disconnected by ensuring it has sufficient counterbalancing.

This section must be in standstill mode before accessing the danger zone. Its MEM optional module offers encoder emulation. The product uses this module to emulate incremental plus absolute value signals for further evaluation. This device cannot be connected with those components that are not specifically named. The unit should never be used if the maximum temperature is too high. Its Category C3 components feature restricted distribution in accordance with IEC 61800-3 specifications. This product can never have salt mist or condensation on its surface. The control section supports international shipment to the destination of your choice.

This section has a maximum pulse width of 100ms. The device also features a typical inrush current rating of 4A. This unit allows the connection of two conductors to a single terminal connecting point by using TWIN ferrules or wires of the same cross-section. Its MEM module must be connected with lines that have double shielding to avoid damage. This section supports a connection with screw terminal blocks with wire ends featuring ferrules and appropriate crimping tools. The product uses the HAS05.1-003 signal level converter to adjust the voltage level at the output of the MEM module to the 5V to 30V range. This CSH01.3C-NN-EN2-MEM-CCD-L2-S-NN-FW control section incorporates backup support for one year.