Product Description

CSH01.2C-PB-ENS-MA1-CCD-S1-S-NN-FW is a control unit for controllers from Bosch IndraDrive product line. Applications for IndraDrive controllers include machine tools, handling and mounting systems, and printing machines. The control unit contains the processor and hardware modules that perform signal processing and control for the controller. The control unit mounts on a power section that provides DC power. The CSH01.2C-PB-ENS-MA1-CCD-S1-S-NN-FW belongs to the category of advanced control units. It is configurable: operators can configure it from a standard control panel. To work properly, the control panel must be connected and disconnected when the control unit is off. Failure to follow this precaution cause the control panel to not be recognized. The CSH01.2C-PB-ENS-MA1-CCD-S1-S-NN-FW is a control unit that is equipped with Profibus master communication. Operators can order several other communication interfaces for master communication.

The CSH01.2C-PB-ENS-MA1-CCD-S1-S-NN-FW is a modular device: operators can order and install optional modules that match application requirements. The encoder IndraDyn module allows interfacing with encoders that operate with 12 Volts power supply. The analog I/O extension module equips the control unit with two differential analog input channels and two analog output channels. The input and output channels operate at ±10 Volts. The input and output channels support 12 bit resolution. The CSH01.2C-PB-ENS-MA1-CCD-S1-S-NN-FW is equipped with a cross communication interface. The interface corresponds to standard IEEE 802.3. The optional module is used as a "master" for cross communication. With Cat5e cable, the minimum bending radius is 48.75 millimeters with flexible installation and 32.50 millimeters with permanent installation. The safety module on the CSH01.2C-PB-ENS-MA1-CCD-S1-S-NN-FW supports safety technology I/O. A product manual supplied with the unit contains relevant instruction that operator must follow for safe and reliable operation.