Product Description

The CSH01.2C-NN-ENS-NNN-CCD-S1-S-NN-FW advanced control section by Bosch Rexroth is positioned inside the power section of the manufacturer’s own drive controller. This section helps the drive controller in controlling as well as monitoring the motor. The product cannot be used outside the control cabinet. This device must have a permanent equipment grounding conductor connection to the main power supply at all times. The unit can be installed only in a machine for which a risk assessment has been executed. Its drive controller controls the holding brake of the motor. This motor operation is not allowed if the emergency stop switch does not work.

The product should have no power connection during maintenance and repair work. This device mounting can be carried out only vertically. The unit comprises a very hot surface at the time of and soon after operation. It is not equipped with any module to support master communication. This section is not intended to be put to function in a residential environment. The product must neither be jammed nor crushed during the handling and mounting actions. This device is equipped with a CCD interface corresponding to IEEE 802.3 standards for cross-communication at the X24 and X25 connecting points. The control section is equipped a with one-year warranty.

This section renders support for standard encoder evaluation. The product comprises a differential input with a typical 500kHz cut-off frequency for the ENS optional module. This device-related Safety Technology I/O can be used only in conjunction with an encoder. The unit is associated with a standard control panel to help in its operation. Its front panel comprises a dedicated multimedia card slot. This section houses a Type 2 relay contact apart from its analog and digital inputs and outputs. The product has standard as well as probe-type digital inputs. This control section is shipped by trustworthy logistics agents.