Product Description

The Bosch CSH01.1C-SE-ENS-EN2-MA1-S2-S-NN-FW is a configurable control section. It belongs to the category of advanced control sections that are developed for IndraDrive controllers. Bosch normally supplies the controllers as completely assembled units. In special cases the controller components can be supplied individually. When a control section is supplied separately, it is mounted onto a power section. This mounting exercise must be performed by trained technical personnel. To protect both the power section and the control section from damage, the maximum number of times that the mounting or dismounting is allowed to be performed is limited to 20. All relevant safety instructions and installation instructions are specified in the product documentation. Personnel working with the CSH01.1C-SE-ENS-EN2-MA1-S2-S-NN-FW must read, understand and implement these instructions. Failure to comply with the instructions can lead to equipment damage, severe injury or even death.

The CSH01.1C-SE-ENS-EN2-MA1-S2-S-NN-FW is a modular device. It is deployed for motor control in industrial applications. The basic unit of the control section has slots on the front panel for optional hardware modules. Four such modules are installed on the CSH01.1C-SE-ENS-EN2-MA1-S2-S-NN-FW: these include a safe motion safety module, an analog I/O extension module, and two encoder modules. The encoder modules include an encoder EnDat 2.1 module and an encoder IndraDyn module. The CSH01.1C-SE-ENS-EN2-MA1-S2-S-NN-FW can be configured and monitored from a standard control panel. This type of control panel must be connected before the control section is powered on. The CSH01.1C-SE-ENS-EN2-MA1-S2-S-NN-FW is supplied with SERCOS master communication. The firmware for the CSH01.1C-SE-ENS-EN2-MA1-S2-S-NN-FW is ordered separately. The unit cools via natural convection and requires 0 to 40 degrees Celsius ambient temperature. The range of allowed installation site elevations is 0 to 1000 meters.