Product Description

The Bosch Rexroth CSH01.1C-SE-EN2-NNN-MD2-L2-S-NN-FW advanced control section must not be operated outside the drive controller. This control section handling must be done after wearing appropriate safety apparel. This product has the possibility of getting damaged if it is mounted and dismounted too often. The device portrays two analog outputs. This unit features current control cycle times of 62.5µs and 125µs. It is associated with five switching frequencies. The section incorporates an Endat 2.1 / 1Vpp / TTL encoder. This product has a high surface temperature of higher than 60°C during and as soon as the operation is over. The device is free of components made of materials that are harmful to the environment.

The section handling as well as mounting actions are to be done by using appropriate tools. The unit utilizes batteries with active chemicals and is enclosed in solid housing. It is fitted inside a power section. This product cannot function with the manufacturer’s comfort control panel of the VCP series. The device comprises three combined I/Os that can function as either digital inputs or digital outputs. This unit incorporates a Safe Torque Off safety function that has no support for bus wring. Its clock frequency depends on the power section. The control section can be sent to any address with a year’s backup support from Wake Industrial.

This product supports interface encoder evaluation for its encoder. The device has different DC output voltages with and without return for its encoder. This unit and the encoder system are directly connected to the manufacturer’s RKG0014 cable. Its encoder portrays a digital input for the sine signals. The section comes with a digital I/O extension with an SSI encoder interface. This product has two digital input groups with eight digital inputs in a group. The device and its digital I/O extension module are connected using a high-density D-Sub connector with 44 poles at the X17 connecting point.