Product Description

The CSH01.1C-S3-ENS-EN2-NNN-S2-S-XP-FW is one of the most sophisticated and advanced productions of the reputable Rexroth Indramat. It is an electrical control unit designed under ideal industrial environments to control the operation of electrical motors by adjusting the current, frequency, and voltage of electrical energy received by the motor during operation. This electrical converter is a separate component that is plugged into a power section to form a rapid response drive controller that can be used in a wide range of industrial machines such as metal forming machines, food processing machines, and lots more. The CSH01.1C-S3-ENS-EN2-NNN-S2-S-XP-FW control unit falls under the C3 product category; it is not produced for use in residential areas that are supplied with low mains voltage. However, if the control unit is to be used in such areas, high-frequency interference should be expected, and additional means of radio interference suppression should be implemented.

The heat generated by this control unit and the power section is regulated via forced ventilation; however, to aid this temperature regulation process, the drive controller should be installed in a position that allows for the easy movement of cool air around its housing unit. The CSH01.1C-S3-ENS-EN2-NNN-S2-S-XP-FW control unit is also specially structured to allow for easy integration into the power section.

The CSH01.1C-S3-ENS-EN2-NNN-S2-S-XP-FW requires an electrical power of about 7.5 watts. Also, during normal operation, the control unit can generate a leakage current of about 3.5 milliamperes, to prevent electrical accidents, industrial operators should ensure that the control unit is properly grounded before it is switched on for operation. The CSH01.1C-S3-ENS-EN2-NNN-S2-S-XP-FW contains a configuration slot for safety technology; it also features the RS232 serial interface.