Product Description

Bosch Rexroth is a famous industrial equipment manufacturer. The firm has been in this business from a long time, so its name is synonymous with reliability and excellence in its field.

The CSH01.1C-S3-ENS-EN2-MD2-L2-S-NN-FW model includes one analog input and four total digital outputs. Using the cycle time function, you may adjust the speed, current, and position over 125–250, 62.5–125, and 250–500 microsecond intervals, respectively. The X4 slot of the CSH01.1 control section is outfitted with a 6 W-consuming IndraDyn/hiperface encoder, and the device also has an intuitive control panel. The control section is an integral part of the single-axis drive controller used in printing, packaging, food processing, handling, and mounting systems applications. The SERCOS model has a minimum cycle time of 250 microseconds, which may vary depending on the firmware. The model has a depth of 49.5 mm, a width of 103 mm, and a height of 244 mm, and it should only be used in accordance with the given instructions. The model is designed for usage in tough industrial conditions and is equipped with flexible firmware (ordered separately). This CSH01.1 control section has between seven and eleven digital inputs and one RS232 serial port.

The model CSH01.1C-S3-ENS-EN2-MD2-L2-S-NN-FW has an EnDat2.1 encoder in slot X8 and a digital extension with an SSI encoder interface in slot X10. The connection module of this Rexroth control section is SERCOS 3 and features an L2 (safe torque off) safety option. The model must be interconnected with 0.75-1.50 mm twisted wire with an input voltage of 24 V and used within a certain temperature range. Twenty times is the maximum number of times a model of drive controller may be mounted and unmounted. This product (CSH01.1C-S3-ENS-EN2-MD2-L2-S-NN-FW) is supplied by Wake Industrial, which also provides a replacement warranty.