Product Description

Bosch Rexroth provides a vast selection of products to fulfill the requirements of all clients, from small enterprises to international organizations. In addition to electric drives and control systems, this firm also manufactures motors.

The CSH01.1C-S3-EN2-EN2-MA1-S2-S-NN-FW model contains a single RS232 serial interface and a 250-microsecond SERCOS cycle time. The model features four digital outputs, a control range of 62.5 to 125 microseconds for the current, and a control range of 250 to 500 microseconds for the position. The efficient and user-friendly control panel of the CSH01.1 control section utilizes one watt of power. The 6-watt EnDat2.1 encoder utilizes this control section's X4 slot. The firmware of the device serves several purposes. Nevertheless, it is supplied independently. Existing device variants with varied drive power and interfaces allow for application-specific use of the drive controller. The model's four digital outputs and one analog input must be calibrated prior to the execution of different application activities. The control section's PWM frequency is variable between 2 and 16 kHz in 2 kHz increments. Install or use the different components of the electric drive and control system after reading the handbook. The CSH01.1 control section has a SERCOS 3 master communication module using 1 W.

The model CSH01.1C-S3-EN2-EN2-MA1-S2-S-NN-FW is equipped with an analog extension I/O in the X10 slot (option 3). The model has an EnDat2.1 encoder in the X4 slot as well as the S2 (safe motion) safety option. The model is only usable with an authorized drive controller and under certain climatic conditions. The model cannot be utilized when operating circumstances diverge from the defined ambient conditions. This involves submerged operation, significant temperature swings, and very high maximum temperatures. Wake Industrial can expeditiously ship this product (CSH01.1C-S3-EN2-EN2-MA1-S2-S-NN-FW) to the specified address.