Product Description

Bosch Rexroth provides conventional components with variable power ratings to fulfill the individual needs of its clients. Among its products are control sections, linear motors, synchronous motors, servo amplifiers, drive controllers, drive converters, servo drives, and power supply modules.

The CSH01.1C-PL-ENS-NNN-NNN-S2-S-NN-FW model comprises a parallel interface communication module and robust firmware (purchased separately). With a maximum pulse width of 100 ms and an inrush current of 4 A, the model is meant to be exceptionally energy-efficient. This CSH01.1 control section has eleven digital inputs, one analog input, and a serial RS232 port. Each of the four digital outputs and two analog outputs of the model may be altered. This model's cycle time function permits velocity control between 125 and 250 microseconds, current control between 62.5 and 125 microseconds, and position control between 250 and 500 microseconds. Compatible with the model is just the accessories and components listed in the manual. If the name of a component is not specified, it cannot be installed or connected. The model consists of one relay contact with a switching frequency between 2 and 16 Hz. This CSH01.1 control section’s X4 slot is occupied by a 6 W-consuming IndraDyn/hiperface encoder.

The model CSH01.1C-PL-ENS-NNN-NNN-S2-S-NN-FW has the safety option S2 (safe motion) and is designed particularly for industrial applications. The control section requires 7.5 watts of power and is supplied by a 24-volt DC source. The control section's 1-watt-consuming control panel is energy-efficient and user-friendly. Rexroth manufactures drive controllers for a range of applications, which are extensively tested before shipping to assure their safe functioning. This Wake Industrial control section (CSH01.1C-PL-ENS-NNN-NNN-S2-S-NN-FW) is protected by a basic replacement warranty in the case of fault or failure.