Product Description

Bosch Rexroth is committed to providing its customers with the highest level of satisfaction, and its professional staff manufactures high-quality products.

The CSH01.1C-PL-ENS-NNN-MEM-S2-S-NN-FW model includes an S2 (safe motion) safety feature, a control panel that consumes one watt, and a relay output. The width-modulation model can be customized with a frequency range between 2 and 16 kHz and a pulse width of 100 ms. This CSH01.1 control section is equipped with one analog input, one serial RS232 interface, and four digital outputs. This model is not intended for use in a public low-voltage main that supplies residential areas. If this model is plugged into such a power source, high-frequency interference is to be anticipated. This may necessitate additional radio interference suppression measures. The model's width, height, and depth are 103 mm, 241 mm, and 49.5 mm, respectively, and its SERCOS cycle time is 250 microseconds. Between seven and eleven digital inputs are used by the model, along with the corresponding connections and accessories. The model's X4 slot contains an IndraDyn/hiperface encoder, while the X8 slot is empty. The CSH01.1 control section is an important component of a drive controller and consumes 7.5 watts of power. Two of the eleven digital inputs on the model are touch probes, and the model's inrush current is four amps.

The model CSH01.1C-PL-ENS-NNN-MEM-S2-S-NN-FW contains a parallel interface communication module. Current control section durations range from 62.5 to 125 microseconds, position control durations from 250 to 500 microseconds, and speed control durations from 125 to 250 microseconds. In the X10 slot of the control section is a 2 W-consuming encoder emulator. The model (CSH01.1C-PL-ENS-NNN-MEM-S2-S-NN-FW) must be utilized with a machine that adheres to national laws and safety standards, and it must be handled by a certified individual.