Product Description

The Bosch CSH01.1C-PL-ENS-NNN-MD2-S1-S-NN-FW is a digital control unit. It is specifically designed for controllers from the IndraDrive product line. The control unit, firmware and a power section make up a complete controller. The control panel can also be used to connect to the control unit for configuration and monitoring. The control panel that works with the CSH01.1C-PL-ENS-NNN-MD2-S1-S-NN-FW is a standard control panel. For proper operation, the control panel should not be connected or disconnected from the control unit after it is powered on. The CSH01.1C-PL-ENS-NNN-MD2-S1-S-NN-FW belongs to the category of advanced control units. It has four slots for plug in modules, one slot for a memory module, one integrated RS-232 interface and several integrated analog and digital I/Os. Each CSH control unit support a master communication interface. A number of options are available for master communication such as Profibus, MultiEthernet and SERCOs.

Master communication interface module installed on the CSH01.1C-PL-ENS-NNN-MD2-S1-S-NN-FW features a parallel interface. Optional modules occupy three slots for plug in modules on the control unit. These include a safety module with safe motion support, an encoder Indradyn module and digital I/O extension module with SSI encoder interface. Slot 2 is available for any plug in module of your choice. Firmware for the CSH01.1C-PL-ENS-NNN-MD2-S1-S-NN-FW needs to be ordered separately from the hardware. Working temperature range for the CSH01.1C-PL-ENS-NNN-MD2-S1-S-NN-FW is 0 to 40 degrees Celsius. The unit cools via natural convection. The power section on which it mounts provides power for the control unit and for the plug in modules. Output voltage of the power section is 24 Volts DC. Trained and experienced personnel should handle, install, operate and maintain the CSH01.1C-PL-ENS-NNN-MD2-S1-S-NN-FW and related equipment.